Products

This is a single key device featuring a touch ON (Momentary) output. The project is built using the LM2907 chip.

This project is an inclinometer based on the ADXL203/ADXL103 accelerometer chip and the Arduino microcontroller ATMEGA328. The device measures tilt and displays it on a 17-segment bar graph display.

This is a high accuracy current sensor project build using ACS37002 IC from Allegro, which is a fully integrated Hall-effect current sensor with 0.85mOhms integrated conductor. A fast overcurrent alert output, programmable gain settings and analog linear voltage outputs are key features of this project.

The project presented here is a Digital Pressure Gauge using an OLED display. The measuring range of this unit is 0 to 10kPa (0 to 1.75 psi).

This reflective sensor module is a high-performance 0-5 cm active proximity detector. The sensor can provide a range up to 50cm with higher current infra-red LED and current limit resistor R2, R4 used across IR LED.

This is an easy-to-program magnetic rotary position sensor with high-resolution 12-bit analog or PWM output. This contactless system measures the absolute angle of a diametric magnetized on-axis magnet.

This OLEDUINO v.2 board is a compact, feature-rich board that incorporates the ATMEGA328 Arduino compatible microcontroller, a 0.96-inch 128×64 OLED display (SSD136), a 5V regulator

The Teensy 4.1 expansion I/O shield is designed to simplify the connection process, saving you time and effort in your project development.

This project provides a solution for converting RS232 signaling to RS485 signaling. This allows long-distance communication since the range supported by RS232 is normally less than 50 feet while RS485’s range can exceed 1000 feet.

This project offers an extremely compact solution for interfacing 2 high voltage resistive or inductive loads. At a low profile, this is the most compact & versatile optically isolated 2 channel solid state relay system.

This automotive-grade two-channel high-side switch provides a robust power management solution by integrating overcurrent, thermal, and open-load protections alongside a dedicated current-sensing function for real-time load monitoring.

4-Channel Relay Board is a simple and convenient way to interface 4 relays for switching application in your project. The project has large Relay which can switch current up to 20Amps.